OpenIR PCB Revision B
Time for a small hardware update to the OpenIR project.
- Removed the single AND gate from the output as the pulses are now controlled purely by software.
- Repositioned the Power LED
- Corrected a mistake with the positioning of the battery connections. These were Off by one
- Added some additional markings to the board for clarification.
Over to the PCB manufacturer for new boards. In the meantime here are some images.
Tags: ElectronicsSunday, April 5th, 2015 at 9:26 am • Electronics • RSS 2.0 feed Both comments and pings are currently closed.